d'un disque dur






Le disque dur est un composant essentiel à un ordinateur car il faut bien un espace de stockage pour les données de l'ordinateur. Read More

d'une barette mémoire RAM .






La mémoire RAM permet de stocker se qu'on a fait sur l'ordinateur sans les sauvegarder pendant qu'il est allumée.plus il y a de mémoire RAM plus le PC va vite.

Read More

d'une carte graphique





La carte graphique sert à avoir de belles images qui se rapproche de la réalité cela sert pour les logiciel trois dés et pour les jeux vidéo toujours plus réaliste.

Read More

il est composé aussi d'un processeur ,


Le processeur sert à calculer,c'est ce qui permet la vitesse au quel les pages de votre ordinateur arrive(ne pas confondre avec les pages internet qui elles utilisent un modème).

Read More

Un ordinateur est composer d'une carte mère.



carte mère

La carte mère sert à avoir les port à l'arrière de l'ordinateur et tout les composants vont dessut la carte graphique,le processeur,les barrettes rams...Mais tout les composants doivent être compatible avec la carte mère.

Read More

This post holds Nokia 3250 Memory Card Corrupted MMC Problem. If you are having one of these problems check these images out and do these simple solutions.

• 3250 Memory Card Problem
• 3250 MMC Problem
• 3250 Memory Card Corrupted
• 3250 MMC Corrupted
• 3250 Insert Memory Card Problem
  
• 3250 Insert MMC Problem

Here Are The Solutions. Please Observe Carefully.

3250 Memory Card Corrupted MMC Problem 1

3250 Memory Card Corrupted MMC Problem 2

3250 Memory Card Corrupted MMC Problem 3

If you have further Questions please don’t hesitate to ask me. 
You can use this help for all kind of mobiles phones like t mobile, virgin mobile, nextel phone, mobile albama, mobile home and boost mobiles efficiency for yourself. We Will also post Cell phone reviews shortly. We will cover Nokia, Samsung, Sony Ericsson and Motorola Cell Phones.

Read More

Is the LCD on your Blackberry Pearl 8100 series broken? Did you get your Pearl 8120 wet and the back light no longer works?  Is it hard to see the Blackberry Pearl LCD screen due to the crack in the LCD?

If you answered yes to any of these questions then this how to repair guide is for you.

To do this repair you will need a T6 torx screwdriver and a guitar pick (or any other small flat tip pry tool).

1. Turn off phone and remove battery.

2. Put the BlackBerry Pearl LCD side down.

3. Pry up lower bottom cover and lift gently towards the front side of the Pearl. There are 4 latches (2 in back, 2 in front) so be gentle. Refer to pictures below.

4.  Remove the 2 screws on the bottom front of the Blackberry.

5.  Remove the 2 screws on the backside near the top.

6. Remove the 2 sides pieces as shown below. Once both side pieces are removed, you will have access to the clips that hold the top and bottom cover together on the Blackberry Pearl.

7. Loosen the 4 clips on the sides using the guitar pick. See photo below for location of clips.

8. Lift off the back cover. 9. Flip phone over and remove front cover by lifting it up.  As you can see, this exposes the blackberry pearl LCD screen.

10.  Run the pick around the edge of the LCD screen to loosen it from adhesive holding it down.

11. Find the connector at the top of the LCD and flip the retaining latch up to release the cable. 12. Remove the cable from the connector, lift and tilt the LCD up from the main board.

13. Install new LCD on the main board. Align new screen and make sure posts slide into position as shown in picture below.

14. Slide LCD cable into the connector and clamp down by pressing black latch down.

Note: Make sure that cable is seated firmly into connector. Failure to do so can cause display problems.

15. Install top cover back on the main board.

16.  Install bottom cover back on.

17.  Press the two covers together firmly. Make sure the 4 latches snap back down.

18. Install the side covers back on.

19. Install the screws on the backside near the top.   Removed in step 5.

20. Install the screws on the front side near the bottom.  Removed in Step 4.

21. Install the lower cover removed in step 3. Make sure it is firmly seated and latched down.

22. Install battery and back cover

23. Power on and test.

Enjoy your Blackberry Pearl LCD screen in all its freshly repaired glory.

If you have a white screen or the display is not functioning right, go back to step 14 and make sure the cable is seated fully into the connector.

Enjoy the new Blackberry Pearl LCD Screen!

Disclaimer: Disassembling your Blackberry Pearl 8100 Series Phone will void the warranty. Proceed with the following instructions at you own risk.  

is not liable for any damage that may occur. This website is in no way related to or associated with Blackberry or any Mobile Carrier.

Disclaimer: Disassembling your Cell Phone will void the warranty. Proceed with the following instructions at you own risk. http://www.crackedlcdrepair.com/ is not liable for any damage that may occur. This website and any information displayed on this website, contains restricted and/or privileged information and is intended only for authorized screening and/or confidential presentation at the author's discretion. If you are not the owner of this website, you must not disseminate, modify, copy/plagiarize or take action in reliance upon it, unless permitted by the author of this website. This website is in no way related to or associated with T-mobile, Nokia, Samsung, Motorola, Sharp, HTC, ATT, Verizon or Danger Inc

Read More